There is not simple one grade of biomass pellet energy, there are multiple quality grades based mainly on the percentage of ash the biomass pellets generate post combustion. For example the highest grade of biomass pellet energy are known as premium wood pellet fuel. This grade of biomass pellet produces an ash content below 1%, generally normally around the 0.5% mark. Now, this ultra low ash content is only achieve by means of using very selective wood resources, by way of no bark, as bark will amplify the ash content of the pellets. Premium wood pellets demand the highest price point, not only as they produce the lowest ash content of any pellet energy, but also because those same wood resources are in high demand. Particle board manufactures as well as more than a few additional industries also used the same raw material. This therefore increased the fee of the raw matter due to increased competition. Now currently the pellet energy market is relatively small, as well as the volume of sawdust formed from timber processing is adequate generally to support the needs of pellet energy manufacturers.

Learn more about Wood Pellet Mill

On the other hand, within recent years issues have arose with adequate sawdust reserve. For example, when the US housing market crashed, housing construction stopped along with so did the demand for manufacture timber. As no timber was being processed, this also meant there was no waste sawdust formed which is the raw matter supply for practically all premium biomass pellet manufactures. This meant the value of sawdust went through the roof, along with also there simply wasn’t enough to support the pellet market. This meant two things, firstly the price of premium biomass pellets sky rocked, in addition to secondly resource issues were common. Many US pellet suppliers were sending what little supplies they had over to Europe, as they could demand higher prices. Yet this further escalated the problem in the US. That issue is no longer present as the housing market is now in rival, in addition to the same circumstances are unlikely to happen again. On the other hand, important lessons require to be learnt from this scenario. An additional issue which also contributed to the high demand along with high pellet prices, is that most pellet consumers cannot use any other grade of pellet fuel additional than premium pellets. This is because most pellet stoves are designed by means of limitations. Consumers by more pellet energy flexible stoves could choose supplementary grades of wood pellets when the price of premium pellets is very high. In the future it will be more common to use other grades of biomass pellets. For example, here at PelHeat we use predominantly wheat straw pellets which help support local farmers.

Read more about Wood Pellets Fuel

The future of the biomass pellet energy market cannot simply depend on premium wood pellets. If so pellet resource problems will become common, prices will be high and by way of will devalue the reputation of the pellet industry. Additional forms of wood can be used to make fuel pellets, for case in point willow. Willow in the form of short rotation coppice can be grown very quickly as well as generate some very high yields. The pellets due make a to some extent higher ash content that premium pellets, yet the prices would be far more responsible. Biomass will play a more significant role.

More information on Wood Pellet Boiler

Possibly related posts: (automatically generated)

Technorati Tags: Ash Content, Ash Wood, Biomass Energy, Energy Manufacturers, Energy Market, europe, Housing Construction, Particle Board, Pellet Mill, Pellets, Pellets Machine, Pellets Press, Post Combustion, Premium Wood Pellets, Quality Grades, Raw Material, Raw Matter, Resource Issues, Sawdust, Sky, Timber Processing, Us Housing Market, Wood Pellet Mill, Wood Pellets, Wood Resources